Trboboost91

selling my ls1 swapped Miata in hopes of getting into w2w racing next year.
ive been a constant lurker here but never really posted much.
anyways onto the car...

96 model, clean title, NO RUST hardly any surface rust on bolts even, car has always been garaged while ive owned it.
its been my track and fun car, therefore it lacks any real amenities.
no heat, no ac, no power steering, no radio or speakers, rides like a highly sprung Miata (although not too bad considering the xida's), no cats (so its can get a bit stinky at times.
that being said it can still be street driven and I drive it to/from work sometimes and when I get a scratch I have driven it to work everyday for a week or so. still very streetable but I wouldn't consider it a daily unless you live in a warm climate and are a hardass.

powertrain
2002 ls1 from a Camaro (have vin)
block hugger headers to 2.5" exhaust with h-pipe and flowmaster mufflers
cold air intake routed out of engine bay
LS6 intake manifold
improved racing oil cooler manifold adapter and -10 AN lines running to setrab oil cooler
all aluminum double pass radiator
racing concepts v3 subframe/bracing kit
t56 from Camaro
stock clutch
racing concepts master cylinder with stainless line remote bleeder
steel driveshaft
racing concepts v3 rear diff mounting kit
ford 8.8 cobra IRS diff with trac-loc LSD 3.55 ratio
racing concepts axles using ford inner joint and Miata outer joint
(just had axles dis-assembled and inspected by the driveshaft shop)

suspension/steering
adjustable flyin Miata 1" solid v8 front swaybar
stock 10mm rear bar (unhook it for autocross)
949 adjustable endlinks on front and rear bars
Xida/AST cs coilovers 700/400 spring rates with helper springs (awesome!)
ES poly bushings in all control arm points (time consuming job)
de-powered rack
R-package tie rod ends
v8 roadsters adjustable front upper ball joints
new lower ball joints
all new "updated" h eccentrics

wheels/tires/brakes
new 15x9 Advanti racing black wheels (1 track day)
new 225/45r15 Rivals (1 track day, 3 sessions)
949 metal stems
949 aluminum lugs
arp extended studs
949 11" front brake kit wilwood super light 4 piston calipers
949 directional vane rotors
m-tuned big rotor upgrade in rear
carbotech XP10 pads in front
carbotech XP8 pads in rear
949 stainless lines

interior
drivers and passenger matching ultrashield spec Miata seats black covers
pass side has corbeau camlock harness that's older
drivers has 1 year old g force camlock harness
momo hub
crg quick release
momo suede steering wheel
autometer digital oil temp guage
longacre oil pressure warning light set to 25 psi
single diagonal rollbar
harddog bolt in harness bar

exterior
hardtop
EP style airdam
birch splitter with home depot adjustable turn buckles
thanks to DIY aero thread in the race prep section!
Post your DIY aero pics - Miata Turbo Forum - Turbo Kitten is watching you test compression.
hard to come across COT carbon fiber wing with discontinued flyin Miata uprights/mounts
you can read about the wing here
New Wing to Test - Miata Turbo Forum - Turbo Kitten is watching you test compression.

the good
its ------ fast with a good driver and could use nt-01's to be redonkulous
completely rust free
clean title
can still be street driven OR taken to the next level and caged
won scca solo XP regional championship with it last year.
charchri4 can vouch, he came down and autocrossed with us in des moines.

the bad
the hood is ugly after a attempted DIY "hood venting" project
(thanks again to the DIY aero thread)
also props go the the fucktard I entrusted to re-install my hood pins at the last track day. edges of the hood are now bent up and hood is wrinkled looking but still serves its purpose so I haven't replaced it yet.
pass fender is also a little wrinkled looking from a dent removal
speedo is the only non working guage. I have another full cluster
with a digital speedo installed that's a 1 wire hookup that I bought from chpmnsws6, but in 2 years have yet to install it. I will include it.
no carpets
no heat
no ac
no tunes
no cares
because race car


im sure theres more I forgot, don't want to add up what I have put into it because I would vomit
want $15,000
Located in Des Moines, Iowa
also have a 18' steel H&H trailer available
would be willing to deliver within 300 miles for gas and beer $$


if you have questions to can email me at trboboostr6@yahoo.com

Trboboost91

more pics

charchri4

Yeah the hood is a mess but as you can see from the specs and photos the rest of the car is spot on. The owner is a heck of a nice guy too. It has one of the best exhaust notes of any LS I have ever heard. Damn good price on an LS swap and not much effort if a guy wanted to put it back to street use.

Side note at this price I'm sure it will sell but if you decide to part it out I'll take the diff, control arms and if I could swing it the brakes. And the areo. And the top. And - ugh sell the car already!

Trboboost91

Thanks jim!
Yeh it seems as though the hood was destined to die.
Should be a easy fix, just haven't gotten around to it.
I'd hate to part it out, there's gotta be someone out there who can enjoy it.
If no one buys it I'll probably just keep on driving it.

Trboboost91

Here's some info on the suspension for the uneducated
Xida coilovers Miata
Xida CS vs. FCM NAs - MX-5 Miata Forum
[NA] Xida vs Afco - MX-5 Miata Forum
MX-5 Miata Forum - View Single Post - Xida CS vs. FCM NAs

rochesterricer

Interesting. OP, do you have a sound clip uploaded to Youtube or anything?

charchri4

Man you are in Rochester MN?? Trust me it will be well worth the 3 hour drive to go see this car - just to see the car! It's not a loud harsh exhaust note like mine it's a bit deeper and has more presence to it. It reminds me of a friend of mine that is 6'5" and 300 lbs. He doesn't say much but when it talks with a no nonsense commanding authority that doesn't need to be loud for everyone in the room to know who's the boss!

If you are seriously interested what I would do is ask the seller to meet you here MOWOG Autocross Series - Event #5 24-Aug-2014 pay for his entry fee to make it worth his trip and road test the car the way it's built to be used. If you do that please let me know and I will be there too!

rochesterricer

Yep, I'm in Rochester. Although I'm shopping for a different house right now, so I can't really justify purchasing a toy at this moment. I think a sound/vid clip would definitely help sell it though.

Perhaps I will try to make it down there on the 24th, simply because I haven't been to an AutoX in forever. I can't guarantee I can make it, but if I do and the OP is there, maybe I will take some video with my iPhone and see how it turns out. If the video quality isn't horrible I will post it up for him

Trboboost91

As much as I want to take the time to record a sound clip, even though id have
No idea how to post it. You tube I'm guessing.
Even without a sound clip i feel confident in saying the car is pending sale.

ToySnakePMC

Best of luck with the sale! This V8Roadster looks stunning -- and, obviously TOO good of a deal for someone to pass up who would prefer instant gratification to have this LS1-powered Mazda NOW versus the time to put one together. You just couldn't build this car for that asking price, IMHO.

Keep us posted!

Trboboost91

car is sold and was street driven by one tough chick all the way to idaho!
didnt see any where to edit the original post to indicate sold either.
maybe a mod does it?

charchri4

I got it for ya. You do it by going advanced when editing your post.

Bummer the car won't around the area anymore. Did she fly in and drive it back then? Also just wondering how you connected with her. Was it through here or some other means?

Congrats on the sale. I think...

Trboboost91

It was her boyfriend that bought it. And she flew in and drove it back for him. Pretty nice of her.
To be honest he emailed me and I listed it in a couple places. Not sure if he saw it here or not.
Also the edit button was not showing on my original post. I tried on a couple different computers too.

Waggers

Howdy! My brother was the gentleman who originally purchased this car. Unfortunately, not long after buying it the car developed some mechanical issues that have left it sitting in the garage ever since. He's now considering selling it, and we are trying to assess the realistic value of the car in its current condition.

Primarily, the wiring has had some failures (the engine bay wiring wasn't water tight), the clutch pedal sinks to the floor after only a little bit of hard driving (it comes back after cooling), and now the motor has significant blowby under wide open throttle. The motor is likely needing a minimum of a mild rebuild to address that.

Given this, what would you folks suggest is a reasonable selling price? Thanks in advance!